ANALYSIS OF DEFECT RATE IMPROVEMENT IN THE SMARTPHONE ASSEMBLY INDUSTRY USING SPC AND DMAIC APPROACH

Nurfitri Rahmawati, Hasbullah Hasbullah

Abstract


In the current era, business is experiencing very rapid development, one of which is the smartphone assembly industry. With the high demand for smartphones from the public, companies will compete to be able to produce quality smartphones with predetermined standards and specifications. Quality control is needed by the company to maintain the products it produces. It is known that the company's production target is 99.50%. However, this target has never been achieved due to a large number of defect  smartphones. Based on calculations using SPC and DMAIC, it is known that most defects are found in production line 1 with the type of smartphone product type B and the type of defect, namely LTE test fail. For this reason, the research that will be carried out in this study focuses on the LTE test fail  defect. The cause of main problem in this research is machine error. Before the repair, the %p value was 2.6%  and after the repair was carried out by restarting the machine every 2 hours, the %p value was 1%.

Full Text:

PDF

References


Akhmatova, M. S., Deniskina, A., Akhmatova, D. M., & Prykina, L. (2022). Integrating quality management systems (TQM) in the digital age of intelligent transportation systems industry 4.0. Transportation Research Procedia, 63, 1512–1520. https://doi.org/10.1016/j.trpro.2022.06.163

Damayant, K., Fajri, M., & Adriana, N. (2022). Pengendalian Kualitas Di Mabel PT. Jaya Abadi Dengan Menggunakan Metode Seven Tools. Jurnal Penelitian Mahasiswa Teknik Industri Universitas Indraprasta PGRI, 3(1), 2.

Endarto, D. A. E. N. (2022). ANALISIS TRANSFORMASI BISNIS PT KAWASAN INDUSTRI WIJAYAKUSUMA (PERSERO) DANANG AGUNG INDARTO, Ertambang Nahartyo, Dr., M.Sc., CMA., Ak., CA. 1–2.

Haviana, E., & Hernadewita, H. (2019). Productivity improvement in the rubber production process using value stream mapping method to eliminate waste. Operations Excellence: Journal of Applied Industrial Engineering, 11(2), 119. https://doi.org/10.22441/oe.v11.2.2019.023

Hunusalela, Z. F., Perdana, S., & Usman, R. (2019). Analysis of productivity improvement in hard disc spare parts production machines based on OEE, FMEA, and fuzzy value in Batam. IOP Conference Series: Materials Science and Engineering, 508(1). https://doi.org/10.1088/1757-899X/508/1/012086

Karo Karo, F., Nugraha, E. S., & Gustiyana, F. N. (2020). Analisis Hasil Pengukuran Performansi Jaringan 4G LTE 1800 MHz di Area Sokaraja Tengah Kota Purwokerto Menggunakan Genex Asistant Versi 3.18. AITI: Jurnal Teknologi Informasi, 16(2), 115–124. https://doi.org/10.24246/aiti.v16i2.115-124

Kurnia, H., Jaqin, C., Purba, H. H., & Setiawan, I. (2021). Implementation of Six Sigma in the Dmaic Approach for Quality Improvement in the Knitting Socks Industry. Tekstil ve Muhendis, 28(124), 269–278. https://doi.org/10.7216/1300759920212812403

Özyazgan, V., & Engin, F. Z. (2013). FMEA analysis and applications in knitting industry. Tekstil ve Konfeksiyon, 23(3), 228–232.

Permono, L., Salmia, L. A., & Septiari, R. (2022). Penerapan Metode Seven Tools Dan New Seven Tools Untuk Pengendalian Kualitas Produk (Studi Kasus Pabrik Gula Kebon Agung Malang). Jurnal Valtech, 5(1), 58–65.

Qin, J., Xi, Y., & Pedrycz, W. (2020). Failure mode and effects analysis (FMEA) for risk assessment based on interval type-2 fuzzy evidential reasoning method. Applied Soft Computing Journal, 89, 106134. https://doi.org/10.1016/j.asoc.2020.106134

Rakib, M. R. H. K., Pramanik, S. A. K., Amran, M. Al, Islam, M. N., & Sarker, M. O. F. (2022). Factors affecting young customers’ smartphone purchase intention during Covid-19 pandemic. Heliyon, 8(9). https://doi.org/10.1016/j.heliyon.2022.e10599

Rohani, Q. A., & Suhartini. (2021). Analisis Kecelakaan Kerja dengan Menggunakan Metode Risk Priority Number, Diagram Pareto, Fishbone, dan Five Why’s Analysis. Prosiding SENASTITAN, 1, 136–143.

Sethia, C. S., Shende, N., & Dange, S. S. (2016). A Case Study on Total Productive Maintenance in Rolling Mill. International Journal of Scientific Development and Research, 1(5), 283–289.

Shafqat, A., Huang, Z., & Aslam, M. (2021). Design of X-bar control chart based on Inverse Rayleigh Distribution under repetitive group sampling. Ain Shams Engineering Journal, 12(1), 943–953. https://doi.org/10.1016/j.asej.2020.06.001

Ulkhaq, M. (2015). Aplikasi Metode Seven Tools Dan Analisis 5W + 1H Untuk. Industrial Engineering Department, Faculty of Engineering, Diponegoro University, 1–9.




DOI: https://doi.org/10.32535/jicp.v6i1.2233

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Nurfitri Rahmawati, Hasbullah Hasbullah

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Flag Counter

Published by:

AIBPM Publisher

Editorial Office:

JL. Kahuripan No. 9 Hotel Sahid Montana, Malang, Indonesia
Phone:
+62 341 366222
Email: journal.jicp@gmail.com
Website:http://ejournal.aibpmjournals.com/index.php/JICP

Supported by: Association of International Business & Professional Management

If you are interested to get the journal subscription you can contact us at admin@aibpm.org.

ISSN 2622-0989 (Print)
ISSN 2621-993X (Online)

DOI:Prefix 10.32535 by CrossREF

Journal of International Conference Proceedings (JICP) INDEXED:

 

In Process


This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.